Differentiator 1. FX & FORMA Quantitative Treatment: Honesty and Accurate Energy Delivery

During InMode treatment, both FX (fat reduction) and FORMA (collagen lifting) have a set maximum output. Therefore, it is crucial to apply appropriate time and energy to expect desired results.

At our clinic, we strictly adhere to an equipment operating time of 6 minutes or more for FX treatments, and energy values of 10K or more for FORMA treatments.

We strive to honestly deliver energy to our patients according to established standards.

At our clinic, all procedures are performed directly by our medical staff, prioritizing patient safety and striving to enhance the quality of treatment.

Differentiator 2. FX Treatment: A Meticulous Method for Rapidly Increasing and Maintaining Temperature

The fat reduction effect of FX treatment can be further enhanced when a certain temperature is reached and maintained.

At our clinic, we focus on rapidly raising and maintaining the temperature of the treated area while minimizing pain.

To achieve this, we meticulously check and adjust output settings, suction pressure, treatment speed, sequence, and skin reaction during the procedure.

The output is set to maximum, facilitating faster attainment of the target temperature through more powerful energy delivery.

Additionally, by setting a longer pulse duration, the time during which radiofrequency is delivered is increased. This extends the energy delivery time through the tip, contributing to a more rapid increase in temperature.

In addition to the InMode device's own real-time temperature monitoring, our medical staff delicately checks the temperature of the treated area with their hand during the procedure. This helps minimize any discomfort patients may feel.

We adjust the movement speed according to each area during the treatment. Initially, we ensure heat is evenly distributed across the entire skin, then concentrate on areas of concern or those with more fat to raise the temperature. This approach aims to reduce pain while simultaneously achieving optimal treatment effects.

Differentiator 3. Thorough Pre-Treatment Design: A Delicate Approach to Minimizing Cheek Hollows

Since FX treatment involves reducing fat, a careful design process before the procedure is extremely important.

Inappropriate treatment can lead to unwanted cheek hollows. Therefore, we carefully consult and design the treatment area with the medical staff, focusing on areas needing asymmetry correction or those of concern, before proceeding with the procedure.

By thoroughly considering each patient's unique face shape and fat distribution, we help achieve natural yet harmonious results.

Differentiator 4. Quantitative Confirmation Post-Treatment: Transparent and Reliable Treatment Process

Upon completion of the procedure, we personally confirm with the patient that the treatment time and energy input were accurately applied. This process aims to build trust in the medical staff's precise execution of the treatment.

InMode Treatment at Our Clinic

*Radiofrequency (RF) lifting methods are broadly categorized into two types.

1. Monopolar

This principle involves one electrode emitting energy and another electrode pad recovering it.

While this method allows energy to penetrate deep into the skin tissue, providing a strong deep heating effect, it may cause some irritation.

2. Bipolar

This method involves radiofrequency energy circulating between two electrodes, primarily acting on the skin surface and dermal layer.

While this method generally involves less pain, it inherently makes it difficult for energy to reach relatively deeper fat layers.

*What is the principle by which InMode FX acts on the fat layer, despite being a bipolar system?

As explained earlier, the bipolar method generally struggles to deliver energy deeply into the fat layer.

However, despite being a bipolar device, InMode FX possesses a unique structure that allows it to effectively target the fat layer.

The core lies in its vacuum suction function.

During treatment, the skin is gently suctioned, bringing the skin and subcutaneous fat layer closer to the electrodes.

In this state, when radiofrequency energy is delivered, heat can penetrate effectively into deeper layers, despite it being a bipolar system.

When treated in this manner, fat cells can be expected to be damaged at an appropriate temperature of around 42-45 degrees Celsius.

Damaged fat cells are naturally expelled through the lymphatic system. Simultaneously, an effect of collagen production being stimulated in the dermal layer can also be expected.

As a result, both fat reduction and elasticity improvement can be considered simultaneously.

*Key Expected Effects of InMode FX Treatment

1. Fat Reduction and Decomposition

When a certain level of heat (42-45 degrees Celsius or higher) is maintained for at least 6 minutes, damage to the cell membranes of fat cells due to heat can be observed.

The contents of damaged cells are naturally expelled through the body's lymphatic circulation.

Procedures targeting fat reduction are mainly applied to areas with significant fat, such as the cheeks or double chin.

2. Inducing Collagen Production in the Dermal Layer

Along with the fat reduction process, the applied thermal energy can stimulate fibroblast activity in the dermal layer of the skin.

This induces the creation of new collagen, while existing collagen fibers contract in response to heat.

*Features of InMode Forma Treatment

Forma is a radiofrequency device that focuses thermal energy on the dermal layer, which is relatively shallower than the fat layer.

This device moves over the skin's surface, delivering temperatures of approximately 42-43 degrees Celsius to the dermal layer.

The delivered temperature activates fibroblasts, which can help improve fine lines, enlarged pores, and overall skin elasticity.

Forma is equipped with a real-time skin temperature measurement system, which helps maintain the target temperature stably during treatment.

This means it can induce collagen production at a consistent temperature without subjecting the skin to excessive thermal stimulation.

Immediately after the treatment, you may experience a sensation of skin tightening, and the collagen regeneration process typically unfolds over 2 to 6 weeks.

*FX and Forma: Application Methods for Each Area

Sagging or fat accumulation issues in different areas of the face have various causes depending on the individual.

- Double Chin Area

A double chin can become more prominent primarily due to excessive subcutaneous fat accumulation or reduced elasticity of the muscles under the jaw.

FX treatment delivers radiofrequency energy to target the fat layer of the double chin, helping to reduce fat cells and stimulate collagen production to improve skin elasticity under the jaw.

If your skin is thin or has significantly lost elasticity, combining it with Forma treatment can be beneficial.

- Cheek Fat Below Zygoma (Improving a 'Grumpy' Impression)

The appearance of sagging cheek fat with age is a common characteristic of mid-face aging. FX can help reduce this unwanted fat volume.

If Forma is used to enhance skin elasticity, a more refined facial contour can be expected.

- Cheeks, Side Cheeks

Enlarged pores, fine lines, and rough skin texture often occur due to decreased collagen density in the dermal layer.

Forma stimulates fibroblasts through thermal energy to induce collagen and elastin production. This can help improve the elasticity and texture of the skin's surface.

- Jawline Improvement

A softened jawline may be primarily due to reduced skin elasticity rather than fat. In such cases, Forma, focusing on the dermal layer, can be considered to induce collagen contraction and regeneration.

If fat accumulation is also a concern, combining it with FX treatment can further refine the jawline contour.

- Delicate Areas like Eyes, Forehead, and Mouth

These areas are prone to fine lines and typically have thin, sensitive skin.

Forma can achieve desired changes with relatively lower energy, making it suitable for these delicate and sensitive areas.

*When Considering InMode Treatment

Simply owning an InMode device does not guarantee treatment results.

During treatment, it's crucial to consider which handpieces to combine, how deep to deliver thermal energy, the total cumulative energy, and delicate settings tailored to the individual's skin condition.

Let's take Forma treatment as an example.

Simply warming the skin is often not enough to actively stimulate collagen production.

A temperature of approximately 42-43 degrees Celsius must be continuously maintained in the dermal layer for at least 10 minutes.

And when a cumulative energy of 8-12 kJ or more is delivered per area, fibroblasts are sufficiently stimulated to begin synthesizing collagen.

The same applies to FX treatment. It requires the combined application of vacuum suction and thermal energy, rather than just simple radiofrequency delivery.

When deep heat exceeding 42 degrees Celsius is delivered for more than 6 minutes, both fat reduction and collagen contraction can be induced.

Depending on the specific treatment area, 8-15 kJ or more of energy may be required, and for areas with thin skin or a tendency to bruise easily, vacuum pressure must be finely adjusted.

It can be more efficient to apply FX for primary fat management, followed by Forma for final skin tightening and elasticity care.

It helps manage swelling and heat that may occur on the skin after the procedure, while simultaneously refining the lifted contours.

In short,

When considering an InMode procedure, we emphasize that what's important is not merely the device itself, but rather the medical practitioner's anatomical knowledge, their ability to adjust device settings, and their capacity to develop a treatment plan tailored to each individual.

At our medical institution, we adhere to the aforementioned standards and continuously research treatment methods to achieve even more satisfying lifting results.

Even with the same InMode treatment, we strive to enhance the completeness of the procedure through a delicate approach that considers each individual's unique characteristics.

Procedure Guide

Step 1 FX: Using radiofrequency energy and IRE (electrical stimulation) technology together, it helps with overall facial lifting from the epidermis to the SMAS layer. This promotes the reduction of unnecessary fat cells and collagen production, leading to a smoother facial contour.

Step 2 FORMA: It delivers focused thermal energy to the dermis layer to activate collagen production, which can help improve fine lines and enhance skin elasticity.

All stages of the procedure are performed directly by experienced medical professionals.